Hong Kong version of Apple Watch S10 charging test

Currently charged twice, I specially recorded the charging speed that everyone is more concerned about Equipment: Hong Kong version of Apple Watch S10 46mm GPS (A2999, MWX13ZP/A, pickup from Apple Store Hong Kong) Usage environment: Mainland, room temperature 29 degrees, use the original charging cable (A2515) with Apple's official 20W charging head (A2244) to start charging optimization * * First charge data * * (it is said that the first charge will be slower): Time/min Charge% ---------------- 0 38% 22 80% 30 87% 36 94% 40 96% * * Second charge data * * (significantly faster than first charge): Time/min Charge% ---------------- 0 1% 10 30% 20 53% 30 **80%** 40 90% 51 100% The second charge figure basically matches the 80% charge speed in 30 minutes, even faster than the declared 100% charge in 60 minutes According to my friend's test, the Bank of China Apple Watch S10 is about 1.5%/min under low battery, and the comprehensive charging rate is about 1%/min (* * approximate estimate, not guaranteed to be accurate. If you have a more accurate Bank of China charging speed, welcome to add * *). The charging speed of the National Bank S10 from 0 to 80% is significantly different from that of the non-WPT version. The speed above 80% is about the same, which still affects the daily experience; PS: The external sound quality of the Watch speaker is unexpectedly OK, higher than expected; PPS: The S10 is really thin and light, and the replacement of the outer ring material of the back panel makes no obvious difference in my wearing experience. At present, I have switched from Ultra 2 to S10. There is no problem in carrying Ultra 2 during the day, but it is indeed a bit uncomfortable to sleep with it at night.