[Help] v2 on loon is always disconnected, but qx/clash is normal
by Poster
Apr 12, 2025
35
Phenomenon: I recently bought loon and used keli basic rules. I always encounter strange phenomena when going to v2, that is, the first post is normal, but from the next one, I can't brush out any v2 content anymore, which is the same as being disconnected.
I have used iPhone + qx for two years, Mac + clash verge (the post was made with this), and none of them have this problem.
It's all the same
I guess that there is something wrong with my loon settings. I didn't set a node automatic switching policy such as url test?
Or for other reasons, I am unfamiliar with the loon configuration, my old buddy can help me point me in the direction 🙏
Replies
-
Anonymous467 Apr 12, 2025There is also a problem with my loon, not only v2, but also google. I can access it the first few times, but I have to refresh it later before the content can come out. Changing to quanx is normal
-
Anonymous114 Apr 12, 20251. Long press on the policy group to select edit to select the policy type 2. It would be better to read the official documentation first after changing to a new tool.
-
Anonymous2438 Apr 12, 2025When using loon to open the v station, I often encounter that it takes a long time to get the content out. Looking at the request record, it should be a quic problem. The response took about 30s, but there is no problem visiting other websites. Now I give priority to using small rockets, which are very silky.
-
Anonymous15325 Apr 12, 2025@ Anonymous467 @ Anonymous2438 I was the same before, it would be fine to change the airport
-
Anonymous15326 Apr 12, 2025AND, ((NOT, ((GEOIP, cn)), (PROTOCOL, QUIC)), REJECT Try this, add the next version to the subscription option, and test it @ Anonymous467 @ Anonymous2438
-
Anonymous14961 Apr 12, 2025What you said upstairs is quite right, you can reject QUIC in the next version; I switched to surge a few weeks ago.
-
Anonymous2438 Apr 12, 2025@ Anonymous15326 I have always disabled 443 udp, ` disable-udp-ports = 80,443 `, but since there is an update, I will wait for the next version.
-
Anonymous1766 Apr 12, 2025It used to be loon, but accessing many off-wall software was often very slow. I changed to surge and it became silky.
-
Poster Apr 12, 2025@ Anonymous15326 # 5 Thank you, I tried it briefly and it worked, and I will observe it for a while
-
Anonymous467 Apr 12, 2025Is @ Anonymous15326 added in rule?
-
Poster Apr 12, 2025@ Anonymous15326 # 5 Feedback, boss, I used it for a few hours, and the probability of reject is indeed much lower than before adding it, but it seems that it still happens occasionally. I just encountered it again: target www.v2ex.com:443 rule REJECT by QUIC Fallback Protection
-
Anonymous15326 Apr 12, 2025@ Anonymous2438 You don't need to add this @ Anonymous467 Yes Oh @ Poster This is not mine, my rejection is the rule displayed
-
Anonymous2439 Apr 12, 2025I also switched to surge, it was indeed a lot smoother
-
Anonymous2440 Apr 12, 2025When I used Circle X before, I found that some different airports were very smooth for accessing V stations, and some got stuck after a while. Looking at the Circle X log, some of the traffic of V stations was UDP Over TCP. Later, I used the parser After turning on UDP and UOT for each node, there was no flow interruption, for reference
-
Anonymous2441 Apr 12, 2025The configuration file I use needs to set the bottom policy to a node. To access V2
-
Anonymous13808 Apr 12, 2025I can't open the i.imgur.com picture bed all the time, I don't know what's going on
-
Anonymous2442 Apr 12, 2025Not only do I get stuck in v2, but the YouTube app is often blank, and it is normal to change circles x
-
Anonymous2443 Apr 12, 2025@ Anonymous13808 # 16 Oracle used?
-
Anonymous13663 Apr 13, 2025@ Anonymous13808 node ip is blacklisted, and the ip in the computer room is not very good. It's best to change the node to the home wide ip. You can customize rules to take imgur alone to a node that can pass verification
-
Anonymous2444 Apr 13, 2025The tf version already supports block-quic, you can try