AFansHub

iMac 21.5 2019 upgrade SSD, not choosing a hybrid hard drive will castrate the M.2 interface!

by Poster May 9, 2020 42
My colleague bought a 21.5 iMac. He started thinking that it was too expensive to add solid state, and then asked me if I had hands-on skills. After watching some videos such as ifix disassembly, I felt that there was no problem, so I agreed. Then I disassembled it today. After disassembling it, I found that instead of choosing a hybrid hard drive, I actually castrated the M.2 interface directly! I searched on the Internet before, but I couldn't find any relevant information. https://www.youtube.com/watch? v = Sw6U _ pRdcEc This is a disassembly I have seen, and there is... As a result, when I took it apart, it looked like this.. Only the solder joints are left. ! [11C8F6AE55DF042FDE00E2172155337C. png] (https://i.loli.net/2020/05/09/x2UAszcIKNBRQeO. jpg)

Replies

  • Anonymous11101 May 9, 2020
    Plug-in. The more affordable is USB 3.1 10Gbps, such as Samsung T7. Tuhao on Thunder and Lightning 3. The advantage is that you can unplug the hard drive after get off work and take the full environment with you. The built-in hard disk is used for TM.
  • Anonymous3378 May 9, 2020
    Cook the dead glass
  • Anonymous4841 May 9, 2020
    Since the memory and hard drive are onboard or non-removable, I no longer like Apple
  • Anonymous3232 May 9, 2020
    It's really saving if you can
  • Poster May 9, 2020
    @ Anonymous11101 is currently preparing to replace the SSD internally, and the original hard disk is used as the hard disk box. @ Anonymous3232 This is really home. I really don't believe how much more the same motherboard and multiple interfaces can cost.
  • Anonymous4842 May 9, 2020
    Pit
  • Anonymous11534 May 9, 2020
    There is also a SATA port in front, right? M2 to SATA?
  • Anonymous4843 May 9, 2020
    Such a sad story, I remember someone mentioned it on the Internet before, you can find relevant experience by searching iMac Fusion PCIe
  • Anonymous4844 May 9, 2020
    Buy a seat and weld it on, the surroundings are quite light
  • Anonymous11542 May 9, 2020
    The capital is miserable.... the world has been suffering apple for a long time hhh
  • Anonymous1575 May 9, 2020
    Return the product Apple's profit margins are not ridiculously high, of course you can save if you have the conditions
  • Anonymous4845 May 9, 2020
    imac originally doesn't have an m.2 interface, right?
  • Poster May 9, 2020
    @ Anonymous4844 you this... It's really hard for me. @ Anonymous1575 cannot be returned, because it has exceeded the return time after buying it. @ Anonymous4845 you can watch the video I linked
  • Poster May 9, 2020
    @ Anonymous1575 Let's talk about the PC hardware industry alone. There are several ones with higher profits than Apple, not to mention this kind of leftover material...
  • Poster May 9, 2020
    @ Anonymous11534 There is only one sata, which is connected with a cable. @ Anonymous4843 deliberately went to search and didn't see it.. All in all, the news in this area is still too unpopular.
  • Anonymous1575 May 9, 2020
    @ Poster It seems that there is no problem with it either But you can't spray without you Just return it
  • Anonymous4846 May 9, 2020
    It's not difficult to weld yourself Or Computer City spend some money to find someone. bga can weld, you are all trivial matters What I am afraid of is that not only the interface is missing, but also the supporting circuit is missing
  • Anonymous4847 May 10, 2020
    This is not difficult to weld, such a high profit computer has to save a few cents...
  • Anonymous3386 May 10, 2020
    Too ugly to eat
  • Anonymous630 May 10, 2020
    It depends on the hands-on ability.